100FT Garden Hose: Stainless Steel That Actually Holds Up
A look at the 100FT Garden Hose stainless steel water hose, its specs, and what the listing doesn't tell you.
The 100FT Garden Hose is the first 100-foot hose I’ve owned that I can drag across a gravel driveway without it kinking or splitting at the connector by Labor Day. At 10 pounds for the full length, it’s lighter than any rubber hose that’s covered the same distance in my yard, but the 9 mm connector is narrower than most brass fittings, and that’s the one thing to verify before you order.
This post contains affiliate links. I may earn a commission at no extra cost to you.

How this review was made: written from my own video review of this product. Every opinion here is my own, from using it myself.
| Length | 100 feet |
|---|---|
| Outside Diameter | 16 mm (0.63 in) |
| Inside Diameter | 12 mm (0.47 in) |
| Weight | 10 lbs |
| Material | Stainless steel + reinforced PVC inner tube |
Why I Grabbed the 100FT Garden Hose in the First Place
I’ve gone through more garden hoses than I’d like to admit, and every single one failed the same way: kinked, cracked at the connector, or just got brittle in the sun after a summer. That’s the whole pitch behind a stainless steel build like this one, a metal exterior that’s supposed to shrug off the stuff that kills rubber hoses. I picked up the 100FT Garden Hose to see if the stainless steel layer actually changes anything day to day, or if it’s just a selling point printed on the listing.
Setting It Up Takes About as Long as Unrolling It
There’s no assembly here beyond screwing the 10-mode nozzle sprayer onto the connector end, which measures 9 mm (0.35 inch). That connector size matters more than people think, it’s smaller than some brass fittings, so if you’re swapping it onto an older spigot adapter, check the thread before you assume it’ll just click on. Once it’s attached, you’re uncoiling 100 feet of hose, and at 10 pounds total, it’s noticeably lighter than a rubber hose of the same length. That’s the stainless steel exterior doing its job, it’s a thin shell, not solid metal pipe, so the weight savings are real without sacrificing the no-kink claim.
How It Holds Up Across a Full Yard
The real test for any hose isn’t the first week, it’s whether it survives being dragged across gravel, doubled around a sharp corner, and left coiled on hot asphalt. The 12 mm (0.47 inch) inner diameter is on the narrower side, which keeps flow steady without the hose ballooning under pressure, but it also means you’re not getting a firehose-level gush out of the 10-mode nozzle on the widest setting. For general yard work, washing the car, rinsing the patio, watering beds, it’s plenty. If you’re trying to fill a pool fast, a wider hose will beat it every time. The outside diameter of 16 mm is what gives it the puncture resistance the listing promises, and so far nothing in my yard has managed to put a hole through it.
What It Costs You After the Purchase
There’s basically nothing to maintain beyond draining it before freezing temps and keeping the nozzle clear of grit, which is standard for any hose. No filters, no batteries, no consumables tied to the nozzle sprayer. If a section ever does get punctured, you’re looking at a patch kit or hose repair connector rather than tossing the whole 100 feet, since the stainless steel exterior is the part doing the heavy lifting against damage, not some proprietary sealed unit.
Should You Actually Buy a Stainless Steel Hose Over Rubber?

Buy it if you hate lugging a rubber hose or dealing with kinks every season. The 100FT Garden Hose is worth checking the current price to see where it sits today. If your rubber hose dies every other summer and you’re within 100 feet of everything you need to water, this one replaces it without asking you to think about it again.
Pros
- Lightweight at 10 pounds for a full 100 feet
- Stainless steel exterior resists punctures better than rubber
- 10-mode nozzle covers most yard and car-washing needs
- No-kink design holds up dragging across gravel and corners
Cons
- 9 mm connector diameter is narrower than some brass fittings, worth checking before you buy
- 12 mm inner diameter limits max flow for pool-filling type jobs
Frequently Asked Questions
Does the stainless steel part rust over time?
The listing states the stainless steel exterior is built to resist rust across varying weather conditions. I haven’t had it long enough to see years of exposure, so treat that as the manufacturer’s durability claim rather than a tested long-term result.
Will this fit a standard outdoor spigot without an adapter?
Most standard hose bibs thread onto the 0.35-inch connector fine, since that’s a common garden hose thread size. If your spigot has a non-standard or older fitting, a basic adapter fixes it, same as with any garden hose.
Can I leave this hose outside year-round?
You can leave it out through summer and fall without issue, but drain it before a hard freeze. The reinforced PVC inner tubing can still crack from ice expansion even with the stainless steel shell protecting the outside.
Get it now
100FT Garden Hose
Get the best price on Amazon →Affiliate link. See the disclosure at the top of this post.