FASTSNAIL Switch 2 Grip Charging Case with Power Bank Review
A grip case with a 10,000mAh magnetic battery and 12 card slots. What works, what you have to strip off before docking.
The FASTSNAIL Switch 2 Grip Charging Case is worth buying if you have kids, travel with the console, and keep losing game cards. You get a 10,000mAh magnetic battery, 12 card slots in the front cover, and rubber corners. Buy it, as long as you accept stripping it down to dock.
This post contains affiliate links. I may earn a commission at no extra cost to you.

How this review was made: written from my own video review of this product. Every opinion here is my own, from using it myself.
| Battery | 10,000mAh magnetic power bank |
|---|---|
| Card slots | 12 silicone slots in front cover |
| Materials | TPU inner frame, PC hard shell, silicone |
| Weight | 1.37 lbs |
| Compatibility | Nintendo Switch 2, official dock only |
| Includes | Case, power bank, cable, spare magnetic ring, strap |
How Many Dads Does It Take to Install a Switch Case?
I put the hard back shell on upside down. Twice. Said it out loud on camera too, because that’s the kind of review this is. The FASTSNAIL Switch 2 Grip Charging Case isn’t complicated, but nothing on it is labeled, and the back shell looks symmetrical until you notice which side carries the magnetic ring.
The good surprise came first though. I assumed I’d have to pop the Joy-Cons off to get the grip frame on. I didn’t. The whole thing slipped on with the controllers still attached. One note from doing it: push the edges all the way past the shoulder buttons, all the way to the very edge. Stop short and the frame sits over your buttons.
The Battery Snapped On and Started Charging Immediately
Boom. Magnet grabbed, charge light came on, done. That’s the whole switch grip charging experience, and it’s the part that justifies the case. 10,000mAh sitting on the back basically doubles what you’re carrying.
Here’s the part the magnet hides: it is not wireless charging. The magnetic ring only holds the pack in place. A short cable still runs from the bank into the USB-C port. So you’ve got a cable doing a tiny loop on the outside of your console while you play. Not a dealbreaker for me, but if you pictured a clean contactless stack, adjust that picture now.
It also ships with a spare magnetic backing ring, which I liked more than I expected to. One already comes installed, so the spare is purely for the day the adhesive gives up.
12 Card Slots Solved a Problem I’d Been Ignoring
Game cards for the Switch 2 are smaller than a thumbnail, and in my house they migrate under couch cushions within 48 hours of arrival.
The front cover answers it. Twelve silicone slots, games stored in the system itself, cover snaps over the screen when nobody’s playing. So the Switch goes in a bag face-protected with the whole library already attached. For a family that travels, that’s worth more than the battery.
The ports stay open, by the way. Rubber cutouts along the top, speakers and USB-C clear at the bottom, and a U-shaped cutout on the back for the kickstand. Nothing I needed got buried.
Rubber Corners, 1.37 Pounds, and a Kid Who Drops Things
Super solid. The thing I keep coming back to is the rubber corners on the TPU frame, because corners are where a dropped handheld lands. Me or one of my kids ends up dropping this, and I’m not worried about it at all. That’s a different feeling than holding a bare Switch 2 over a tile floor.
The trade is weight and bulk. All in, the case and power bank run 1.37 pounds on top of the console, and the grip sides are deliberately thick for the ergonomics. If you want something slim for a jacket pocket, this is the wrong product. It’s a travel and couch rig, built for long sessions with your hands wrapped around actual grips instead of a flat slab.
The real catch is docking. The case is dockable, but only after you pull the front cover and the power bank off first, and only with the official Nintendo dock. Third-party docks are out. In a house where the Switch bounces between handheld and TV every evening, that’s two parts to remove every single time.
Where It Sits Against Plain Grip Cases
Most Switch grip cases pick one job. This one stacks three. A standard nintendo switch grip case gives you contoured sides and nothing else. A standalone power bank gives you charge but sits loose in the bag. A card wallet is a fourth thing to lose.
Buying those separately means three purchases and three things to remember, and the Amazon sales rank climbing from a 90-day average of #2,438 to #1,940, with 100+ units moved last month, suggests other parents are landing on the same math.
What the Money Actually Buys
You’re paying one price for a protective grip, a 10,000mAh bank, a screen cover, 12 card slots, a cable, a detachable strap and a spare magnetic ring. Pricing has been flat for about three months, so there’s no obvious reason to sit and wait for a swing. Current price is on the product page where it stays accurate.

Compared against buying a decent grip case and a separate 10,000mAh bank, this costs the same but eliminates the loose-pack problem, one object instead of three to track.
Pros
- Slips on with the Joy-Cons still attached, no disassembly
- 10,000mAh pack snaps on magnetically and starts charging instantly
- 12 card slots fix the where-do-the-games-go problem
- Rubber corners I’d trust with a kid-height drop
- Spare magnetic backing ring included
Cons
- The hard back shell has no orientation marking, I installed it wrong twice before spotting the magnetic ring side
- Magnetic mount is not wireless charging, you still run a cable to USB-C
- Front cover and power bank both have to come off to dock, and official dock only
- 1.37 pounds of added bulk, this is not a slim case
Frequently Asked Questions
Can I use the power bank on its own for a phone?
It’s a standard 10,000mAh bank with a cable connection, so it detaches from the magnetic ring and goes in a bag. Charging anything else depends on your own cable since the magnet is only a mount, not a power transfer.
Does it work with third-party docks?
No. FASTSNAIL lists it as compatible with the official Nintendo dock only. If you’ve got a travel dock from another brand, you’ll be pulling the whole case off each time.
Will it fit the original Switch or the OLED?
It’s built specifically for the Nintendo Switch 2. The frame is molded to that console’s dimensions, so older models aren’t the target here.
Can I take the Joy-Cons off while the case is on?
Yes. The protective frame detaches so you can release the Joy-Cons in seconds without stripping the middle frame off the console. That matters if you play tabletop multiplayer.
Does the shell scratch the console when you remove it?
The TPU is soft enough to flex off cleanly, which is the point of the dual-material build rather than a single rigid plastic. Pull from the corners and it separates without fighting you.
Clicking takes you to Amazon. As an Amazon Associate we earn from qualifying purchases — pricing and availability subject to change.
Get it now
FASTSNAIL Switch 2 Grip Charging Case
Get the best price on Amazon →Affiliate link. See the disclosure at the top of this post.
The docking ritual is the only real question: if your Switch 2 lives in handheld mode most of the time, buy this without much debate. If it goes into the dock every night, you’ll be pulling two parts off the case every single evening, decide whether that’s your life before you check the current price.
🛍️ Shop everything in this video
Every product mentioned, in one place. These are affiliate links, so I may earn a small commission at no extra cost to you.
🛍️ Fast Snail Protective Case for Nintendo Switch: check price on Amazon →
🛍️ Fast Snail 10000mAh Fast Charging Power Battery Pack: check price on Amazon →